We guarantee we unclog your drain or we do not charge!

Unclog any 1st floor drain line in the home: $125

*2nd story drains are an additional $50 due to the increase in workload.*

Pull Toilet, Snake Line, & Reset Toilet: $375

Main sewer line Clogged: $225 with access or $375 to pull/snake/reset toilet.

Unclog toilet: $95 with auger or $375 to pull/snake/reset the toilet with a new wax seal.

Camera and Locate sewer line 1 1/2” - 4”: $275

Camera Inspection of sewer line: $175

Once we have unclogged your drain, we will send one of our specialized sewer camera’s down the drain, complimentary, to determine whether or not the drain line needs further treatment.

1 1/2” - 2” Drain line [Branch lines]: $455

3” - 4” Drain line [Main sewer line]: $495

Outside Area Drains: $495

Leak detection is an art. Having grown up a second generation plumber in Southern Orange County & servicing this area exclusively for the last two decades: It gives me a huge advantage over most plumbers in the area. I am very familiar with the many different neighborhoods and communities from San Clemente to Santa Ana. I know these communities inside and out, which communities have post tension slabs & which communities have asbestos in the drywall. We work closely with a water damage expert that has been doing business for nearly 30 years in the area they are licensed bonded and insured & will work with your home owners insurance.

Leak Detection: $275

This includes finding & stopping the leak. If further repair is needed Chris will go over repair options on site.

Patch above ground copper pinhole: Starts at $195 and varies depending on pipe size, location, access and how much pipe will need to be replaced.

Labor only, customer supplies water heater and parts: $450

Labor + Water and Gas Flex lines Customer Supplies Water Heater: $500

We personally recommend Bradford White water heaters.

These are labor only, customer supplied parts packages.

****There will be no warranty on customer supplied fixtures or parts.****

Kitchen Faucet (Single hole or with plate): $225

Kitchen Faucet(3 piece or more): $250

Reverse Osmosis Installation: $350

Under Dink in Line Water Filter Installation: $195

R/O or Water Filter change out: $225

Center Set(One Piece) Faucet Installation: $150 per faucet

Wide spread(three piece) faucet installation: $195 per faucet

Toilet Installation : $250 per toilet

Garbage Disposal Installation: $225

Dishwasher: $225

Shower Trim, Head, Spout: $150

Shower cartridge or stem: $195

Faucet cartridge’s or stem’s: $195

Garbage Disposals

These prices include power & installation fees.

Customer supplied: $225

Insinkerator Badger 1 1/3 Horsepower disposal: $300

Insinkerator Badger 5 1/2 HP Disposal: $475

Insinkerator Badger 5XP 1/2 HP Disposal: $475

Insinkerator Pro 750 3/4 HP Disposal: $575

Insinkerator Evolution Compact 3/4 HP Disposal: $575

Insinkerator Evolution Select plus 3/4 HP Disposal: $575

MOEN Gx100c Chef series 1 HP Disposal: $455

MOEN Exl 100c EX Chef series 1 HP Disposal- $500

MOEN Gx575c Host series 3/4 HP Disposal: $375

MOEN GxP50c Prep series Pro 1/2 HP Disposal: $255

MOEN GX50c Prep series 1/2 HP w/ noise reduction: $275

MOEN GXp33c Lite series 1/3 horsepower disposal: $235

Budget disposal 1/2 HP (orange in color): $245

Budget disposal 3/4 HP (orange in color): $295

If you have a specific garbage disposal you want and you do not see it on this list just let us know when you are scheduling your appointment! We will give you a price for that specific disposal and we will be sure to have it with us on our visit.

Prices include parts & installation fees.

Two Piece Toilets

Basic two piece toilet package: $375

Premium two piece toilet package: $495

Top of the line two piece toilet package: Call or text to discuss pricing.

One Piece Toilets

Prices vary call, text or email for current pricing.

Feel free to inquire about our packages and what they include!

Pull & Reset Toilet: $275

Includesreplacing wax rings, closet bolts & calk seal at the base of the toilet.

*Additional $175 if the flange needs to be replaced.

New Stainless Steel Toilet Flange: $370

Pull toilet, cut out & replace old toilet flange with a new stainless steel toilet flange, & reset toilet with 2 new wax rings and new closet bolts.

Minor Toilet Repair: $225

New Korky chlorine resistant flapper with 1 year manufacturer warranty & Fluidmaster pro 45 fill valve.

*Add new handle for $25

Major Toilet Rebuild: $375

New Korky chlorine resistant flapper with 5 year manufacturer warranty, Fluidmaster Pro 45 Fill valve, tank to bowl bolts & gasket.

Complete Tank Rebuild: $425

We completely rebuild the tank by replacing every part inside. Includes new Chlorine resistant flapper, Pro 45 Fill valve, 2” or 3” Flush valve, tank to bowl gasket, tank to bowl bolts & washers. The complete toilet rebuild also includes a brand new handle.

Luxury Toilet Rebuild(for Toto and other 3” flush valve toilets): $475 Includes a Korky Quietfill fill valve, 3” Flush valve replacement, 3” High end Chlorine resistant flapper, 3” tank to bowl gasket, new tank to bowl bolts, nuts, washers & a new side or front mounted Brushed Nickel or Chrome handle.

New 6” Shower Arm: $125

New 8” Shower Arm: $150

New Tub Spout(Chrome): $195

New Tub Spout Diverter(Chrome): $225

New Tub Flange with Stopper & Overflow Cover(Chrome): $250

Waste & Overflow Installation(Chrome) with Access: $395

Waste & Overflow Installation(Chrome) without Access: $475

We normally stock and supply Chrome Trim so if you have a different color be sure to ask us for pricing on different colored trim!

We can also supply trim! Ask us about trim and trim pricing for your valve!

Moen Posi Temp: $350

Moen 1225 series: $250

Mixit regular: $325 (ask me about trim options and pricing)

Delta(all delta models): $425

Kohler: $295

Price Pfister 2 Handle: $255

Price Pfister 3 Handle: $275

Symmons: Starting at $350

Newport and Kingston Brass: Starting at $395

Harden: $395

Glacier Bay- Prices vary

American Standard-Prices vary

Brizzo- Prices vary

Rohl- Prices vary

If you do not see your shower valve brand on this list do not worry! We service ALL shower brands and can get parts for pretty much every brand. This is just a quick list of the most common commercial brands we run into.

We are also able to provide and replace shower trim/hardware for the many different brands available on the market today we can discuss Trim options if that is something you are interested in.

We are able to completely replace your valve with a new valve as well! Call or text us today and ask us how!

Moen Posi Temp Shower Valve: $500

Customer Supplied Shower Valve: $450

Quarter-turn Angle Stop: $75

Multi-turn Angle Stop: $65

Washing Machine Bibb: $95 each

Washing Machine Box with 1/4 Turn Valves & Drain: $495

Hose Bibb Replacement: $225

1” Whole House or Water Heater shut off(Ball valve): $395

3/4” Whole House or Water Heater Shut Off (Ball valve): $350

Pressure Test: FREE OF CHARGE!

We will test the water pressure coming in to your home.

3/4” Double Union Lead Free Pressure Regulator made by Zurn: $425

1” Double Union Lead Free Pressure Regulator made by Zurn: $495

3/4” Complete Main Riser Rebuild 3/4” Lead free double union Pressure Regulator, 3/4” Lead Free Ball Valve & Hose Bibb: $575

*This price may differ depending on your set up, send us a picture for a more accurate quote.*

1” Complete Main Riser Rebuild 1” Lead Free Double Union Pressure Regulator, 1” Lead free Ball Valve & Hose Bibb: Call for quote, Prices vary

*This price may differ depending on your set up, send us a picture for a more accurate quote.*

There are solely prices for parts we provide, not the labor to install them.

ABS Fittings & Pipe:

ABS 1 1/2” Pipe: $15 per foot

ABS 2” Pipe: $20 per foot

ABS 3” Pipe: $30 per foot

ABS 4” Pipe: $40 per foot

ABS 1 1/2” Tubular Style trap Adapter: $25

ABS 1 1/2” Tubular Style P trap: $45

ABS 1 1/2” Tubular 2 Part Waste: $65

ABS 1 1/2” Glue Trap: $75

ABS 2” Glue Trap: $95

ABS 2” Trap with nut: $125

ABS 1 1/2” Fittings: $25 per fitting

ABS 2” Fittings: $30 per fitting

ABS 3” Fittings: $35 per fitting

ABS 4” Fittings: $55 per fitting

AIR GAP: $95

Air Gap to Disposal Hose: $15 per foot

Hose Clamps: $2.50 per hose clamp